How should hvac maintenance agreements be structured?

Service Penguin 6 min read Reviewed
A clean return air grille low on a light hallway wall

The short answer

Structure an HVAC maintenance agreement as an annual plan with two seasonal tune-ups, one before cooling season and one before heating season, plus priority scheduling and a written repair discount. Offer two or three tiers and bill a flat monthly price. Spell out in writing the number of systems covered, the filter size and frequency, the diagnostic fee, what the discount applies to, and the renewal and cancellation rules.

Key points

  1. A residential HVAC maintenance agreement works best as an annual plan with one tune-up before cooling season and one before heating season.
  2. Every perk in the agreement, including filters, repair discounts, diagnostic fees and priority scheduling, should be defined in exact terms so nobody argues about the agreement later.
  3. A flat monthly price spreads two visits across twelve payments and keeps cash coming in during the slow shoulder months.
  4. Price each HVAC plan from the real cost of the visits plus the cost of the discounts, and price it per system rather than per house.
  5. Cancellation math belongs in the written agreement before the customer signs, and cancellation and renewal rules vary by state.

HVAC maintenance agreements should be structured as annual plans with two seasonal tune-ups, priority scheduling and a written repair discount, sold in two or three tiers and billed as a flat monthly price. A plan stays profitable through the details that most agreements leave vague: how many systems it covers, which filters, what the discount applies to, and what happens if the customer leaves early.

What should a service contract include?

A residential HVAC service contract should name the visits, the equipment covered, each perk in exact terms, the price, the term and the exit rules. Write each item so a new tech or a new customer could read it and know exactly what's owed.

  • Visits. Two visits a year: a cooling check in spring and a heating check in fall. Published plan examples use the same two seasonal visits.
  • Systems covered. Count each furnace, air handler, condenser or heat pump. A house with two systems takes close to twice the time.
  • Filters. State the size, the quantity, how often you replace them, and whether specialty media filters cost extra. Published examples range from one standard filter per visit to all filters for the year, according to the same plan guide.
  • Repair discount. Published example plans offer 10% to 20% off repairs. Say whether the discount applies to labor, to listed parts or to both, and exclude equipment replacement.
  • Diagnostic fee. Say whether the fee is charged, reduced or waived on that tier.
  • Priority scheduling. Define priority as the next available opening ahead of non-members, not as a promised response time.
  • Term, renewal and cancellation. Give the start date, how the plan renews, and how a refund is worked out.

How many tiers should an HVAC maintenance agreement have?

Three tiers is the common pattern, and two tiers work fine for a small shop. One 2026 pricing breakdown gives these example published prices: a basic tier with one tune-up, a standard filter and priority booking at $150 to $199 a year. A standard tier with two tune-ups, a fuller inspection and a repair discount runs $250 to $349. A premium tier with two tune-ups, parts coverage and a waived diagnostic fee runs $350 to $499.

A contractor survey reported by ACHR News and summarized here found that 44% of contractors charged $200 a year, 29% charged $300, 19% charged $400 or more and 8% charged $100. The same survey found that 87% of homeowners said they would pay $100 or $200 a year. Most buyers land on the middle tier. A premium tier that covers parts carries the most risk, so price it from your own repair history.

Should I charge per visit or a flat monthly price?

A flat monthly price is usually the better fit for an HVAC maintenance agreement. Monthly billing turns two visits into steady cash and makes the plan feel smaller. A $300 standard plan becomes $25 a month, which is easier to say yes to at the kitchen table.

Billing per visit works for customers who want to pay when the tech shows up. Without a commitment, though, the plan becomes a reminder list, and customers drift away after one season. With monthly billing, put the card or bank account on file with the customer's written authorization, start billing on the agreement's start date, and you never have to chase anyone.

How do I get paid through the slow season?

Sell agreements so the tune-ups land in the spring and fall shoulder months, and let monthly billing carry cash through those same weeks. Here's an example: 120 members at $25 a month bring in $3,000 every month, whatever the weather does. The tune-ups also fill the weeks when the phone is quiet, which is better than fitting them in during a July heat wave.

Group shoulder-season tune-ups by neighborhood so a tech can do four or five in a day without crossing town. Book the next season's visit before you leave the driveway.

A slatted wall air vent above a doorway in a calm, bright bedroom

How do I handle a customer who cancels mid-contract?

Write the cancellation math into the agreement before anyone signs. With monthly billing, cancelling means stopping the future charges. Then you settle the gap between what the customer paid and the regular price of the visits they already received.

Here's an example. A customer cancels after paying four months at $25, which is $100, and has already had a spring tune-up that sells for $139 at regular price. Your agreement should say whether you collect the $39 difference or let it go. Rules on cancellation, refunds and automatic renewal vary by state, so check with your state's consumer protection office or an attorney before you finalize the wording.

Worked example: pricing a two-visit residential plan

Start from what the visits cost you, then add the cost of the perks. All of the figures below are examples, so use your own numbers.

  • Tech time on site: 1 hour at a $60 loaded labor cost = $60
  • Drive time: 30 minutes = $30
  • One standard 1-inch filter = $10
  • Cost per visit = $100, so two visits = $200

At $25 a month, the plan brings in $300, which leaves $100 a year per member before any discounts. Say a member then needs an $800 repair, and your 15% discount covers parts and labor. That's $120 off, which wipes out the plan margin on paper. The repair itself still earns your normal margin, though, and a member calls you instead of shopping around.

Waived diagnostic fees belong only on a tier priced to absorb them. At an example $89 fee, two waived service calls a year cost $178. That's why the premium tier sits at $400 or more and not at $300.

Example HVAC plan tiers (published 2026 example prices)
Basic Standard Premium
Tune-ups 1 2 2
Extras Filter, priority Repair discount Parts, no diag fee
Per year $150–$199 $250–$349 $350–$499

How much of my revenue should be recurring?

No single right share exists for recurring revenue, so measure yours and raise it each year. Use two formulas:

  • Recurring share = agreement revenue in the last 12 months ÷ total revenue in the last 12 months × 100. Example: $54,000 ÷ $360,000 = 15%.
  • Renewal rate = members who renewed ÷ members who were up for renewal × 100. Example: 180 ÷ 220 = 82%.

Check both numbers once a year, before the spring push. A rising recurring share with a falling renewal rate means you're selling plans faster than you're keeping them. For more heating and cooling guides, see the HVAC page, and for a related trade, read how to offer a plumbing maintenance plan.

What pros ask next

Should I inspect an older system before enrolling it in a plan?

An inspection before enrollment protects a plan that includes parts coverage or waived repair fees. Without an inspection, an older system with an existing problem can cost more in its first month than the plan brings in all year. Make the first tune-up the enrollment inspection, and note any existing problems in writing before coverage starts.

How do I price an agreement for a house with two systems?

Price an HVAC agreement per system, not per house. A second system adds close to a full visit's worth of time and filters. A common approach is a full price for the first system and a smaller add-on for each additional system, with the system count written into the agreement so the price matches the work.

Should an HVAC agreement renew automatically?

Automatic renewal keeps members from lapsing, but automatic renewal rules vary by state. Some states require advance notice before renewal and an easy way to cancel. Send a renewal reminder before the term ends, state the renewal terms clearly in the agreement, and check your state's requirements with the consumer protection office or an attorney.

What should priority scheduling actually promise?

Priority scheduling should promise the next available opening ahead of non-members, not a set response time. Writing in a promise like same-day service creates a breach every time a heat wave fills the board. Describe priority in plain words, such as members being booked ahead of non-member calls, and keep that promise every time.

How do I bill recurring customers without chasing them?

Recurring customers stay current when billing is automatic and authorized up front. Collect written permission to charge a card or bank account at signup, bill on the same day each month, and send a receipt each time. A customer who never has to remember to pay is far less likely to fall behind.

References

  1. Two seasonal visits, filter terms and priority scheduling in HVAC plans, DJ Contractor Marketing
  2. Repair discount ranges in HVAC maintenance plans, InsiderCost
  3. Example HVAC plan tiers and published prices, Construction Cost Accounting
  4. Survey of contractor agreement prices and homeowner willingness to pay, as reported by ACHR News, JordanWorx

From Service Penguin

How Service Penguin does this

Service Penguin turns an HVAC maintenance agreement into reusable service plans with a monthly price. Every tune-up for the term is created on approval, billing starts on the start date, and customers can choose autopay. It runs from a phone, tablet or the web, for one truck or up to 10 crews, and it's free to use. See pricing for details.

Free to use. No monthly bill.

We get paid when you get paid.

Create your free account

You might also like

Browse all articles →

New answers, by email

Stay up to date

New answers for service pros, by email.

Submitting subscribes you to emails from Service Penguin. You can unsubscribe any time.