How do I offer a plumbing maintenance plan to existing customers?

Service Penguin 7 min read Reviewed
Under-sink plumbing with new pipes and valves installed in a residential bathroom

The short answer

Offer a plumbing maintenance plan to existing customers at the end of a finished repair or water heater visit, in writing, beside the price of the single job. Sell work the customer can picture: a yearly whole-home inspection, water heater service, a photo report, priority scheduling and set member pricing on repairs. Price the plan from your real cost per visit, and offer it first to customers who pay on time.

Key points

  1. The easiest plumbing maintenance plan sale is to a customer you just helped, at the end of a finished repair or water heater visit.
  2. A plumbing maintenance plan sells better when it names the work, such as an annual inspection, water heater service and a photo report, than when it promises to prevent emergencies.
  3. A written plan offer beside the single repair price lets the homeowner compare two clear choices instead of one number.
  4. Price a maintenance plan by adding up the real cost of each visit and dividing by one minus your target gross margin.
  5. A plumbing plan agreement should spell out what is included, how often visits happen, what costs extra and whether emergency work is covered.

The way to offer a plumbing maintenance plan to existing customers is to bring it up at the end of a finished repair or water heater visit, in writing, right beside the price of the job you just did. Sell work the homeowner can picture: one or two inspections a year, water heater service, a photo report, priority scheduling and member pricing on repairs. Price it from your real cost per visit, not from a guess.

Existing customers are the easiest plan sale you have. They already let you in the house, they've seen your work, and they have your number. A plan just puts the next visit on the calendar before the next leak does.

What should a plumbing maintenance plan include?

A plumbing maintenance plan should include a set number of visits, a defined inspection list, water heater service and clear rules on what costs extra. If a homeowner can't picture what happens on the visit, they won't pay for it.

A plan that holds up usually covers:

  • A whole-home inspection: fixtures, visible supply lines, shutoff valves, signs of leaks and water pressure.
  • Water heater service: flush and check following the manufacturer's instructions for that unit.
  • A written report with photos: what you checked, what you found and what you'd fix.
  • Priority scheduling: members get booked ahead of non-members when something breaks.
  • Member pricing: a stated discount or reduced service-call charge on repairs.

Annual inspections, priority scheduling and reduced member pricing on repairs are three of the most common plan features, according to a 2024 ACHR News survey reported in JB Warranties' guide to plumbing service agreements.

Skip the vague promise to "prevent emergencies." No inspection stops every failure, and a customer who hears that will hold you to it. Put it all in a written agreement: what's included, how often you come, which parts and repairs cost extra, and whether emergency work is covered. Rules on service agreements vary by state, so check with your state or an attorney before you sell one.

Which existing customers should I offer the plan to first?

Offer the plan first to customers who paid on time, were easy to work with, and own a home with older plumbing or a tank water heater. Those are the customers worth keeping, and a plan keeps them.

A customer worth keeping pays without chasing, gives you reasonable access, doesn't argue every line, and sends a neighbor your way now and then. A customer who calls three times about a $40 difference is not your first plan offer.

With a notebook, go through your last 12 to 18 months of invoices. Put a star next to every good payer with a house over 15 years old or a water heater you've worked on. That starred list is where you start calling or offering on the next visit.

When is the best time to offer the plan?

The best time to offer a maintenance plan is at the end of a completed repair visit, before you close the invoice, and on any water heater repair or replacement. The homeowner just watched you fix something, and the value is in front of them.

Keep the offer short and plain. Something like: "We can come back once a year to inspect the plumbing you can reach, service the water heater, and send you a photo report. Members get booked first and pay less on repairs."

Service Penguin pro app: Driving order route optimization showing three customer stops in Denver area with pickup/dropoff

The water heater visit is the strongest trigger. A tank heater needs regular service, and a yearly visit is an easy reason the customer can understand. You're not selling a feeling; you're selling the next appointment.

How do I offer a full service plan beside a single job?

Put the single repair and the plan on the same written estimate, side by side, so the customer picks between two clear choices. One option is today's repair. The other is today's repair plus the plan, with the date of the first plan visit.

Homeowners take these plans seriously. In the 2024 ACHR News homeowner survey cited by JB Warranties, 15% rated maintenance agreements extremely important, 24% very important and 35% important. That's 74% who rated them at least important, and the same survey found buyers commonly expect discounts on parts and labor and priority scheduling.

Side by side also helps you attract customers who don't shop on price alone. A price shopper compares one number. A homeowner looking at a repair and a plan with photo reports is comparing a relationship, and that customer tends to stay.

How do I price a plumbing maintenance plan without guessing?

Price a plumbing maintenance plan by adding up the full cost of each visit, multiplying by the number of visits, and dividing by one minus your target gross margin. Every number below is an example; use your own.

Say one plan visit costs you $105 in technician labor, drive time, small parts and office time.

  • Basic plan, one visit: $105 ÷ 0.60 = $175 a year, about $14.60 a month.
  • Plus plan, two visits: $105 × 2 = $210. At a 40% gross margin, $210 ÷ 0.60 = $350 a year, about $29 a month.

Any repair discount comes out of the repair's margin, not the plan's, so make sure your repair prices can carry it. If 10 good customers take the Plus plan at $350, that's $3,500 a year and 20 visits already on the calendar, before a single repair.

How do I know if the plan is paying off?

A plan is paying off when enough customers take it, renew it, and the visits cost what you priced them at. Track three numbers once a quarter.

  • Take rate = plans sold ÷ plans offered × 100. Offer it 40 times and sell 9, and your take rate is 22.5%.
  • Renewal rate = plans renewed ÷ plans up for renewal × 100.
  • Plan margin = (plan revenue − actual visit costs) ÷ plan revenue × 100.

If plan margin drops well below your target, your visits are running long or your price is too low. Fix the price at renewal, not halfway through the term. For keeping these numbers straight at night, see how a solo plumber keeps up with paperwork by phone.

Example plumbing plan tiers (all prices are examples)
Basic Plus
Visits a year 1 2
Inspection Yes Yes
Water heater service Yes Yes
Photo report Yes Yes
Priority booking No Yes
Service-call charge Standard Reduced
Example price $175/yr $350/yr

What pros ask next

How much of a repair discount should plan members get?

A repair discount for plan members should come out of margin the repair can afford, not out of the plan price. One simple approach is a flat percentage off labor, such as 10% as an example figure, rather than off parts. The written agreement should say exactly what the discount applies to, so a member never expects a free water heater.

Does a plumbing maintenance plan cover emergency calls?

A plumbing maintenance plan covers emergency calls only if the written agreement says so. Priority scheduling means a member gets booked ahead of non-members, not that after-hours work is free. The agreement should state whether nights and weekends carry the usual emergency rate and whether a reduced service-call charge applies. Clear wording prevents a 2 a.m. argument about what the plan included.

How do I raise my plan price at renewal without losing good customers?

Raise a maintenance plan price at renewal by recalculating your real cost per visit and applying the same margin formula you started with. Give customers written notice well before the renewal date. Show what last year's visits found, with photos, so the new price is tied to real work. Good customers usually accept an increase they can see the reason for.

When should I stop renewing a plan customer who costs me money?

Stop renewing a plan customer when the visits keep running far past the time you priced, payments are always late, or every visit turns into a dispute. Compare the customer's plan revenue with the actual hours and drive time spent. A polite written notice before the renewal date, with an offer to keep doing single repairs at standard rates, ends the plan cleanly.

How do I find customers who want full service plumbing plans?

Customers who want full service plumbing plans are often homeowners with older houses, tank water heaters, rental properties or little interest in handling repairs themselves. Look for good payers in your past invoices, plus anyone who asked what else you noticed during a visit. A homeowner who asks questions about the house is usually a better plan prospect than one who only asks the price.

References

  1. Common plumbing plan features and 2024 ACHR News homeowner survey on maintenance agreements, JB Warranties

From Service Penguin

How Service Penguin does this

Service Penguin lets a plumber offer the repair and the maintenance plan side by side on one estimate, turn an approved plan into every visit of the term, and send a photo summary after each visit. Contracts carry one monthly price with services on their own months. Service Penguin is free to use. See how it works for plumbing.

Free to use. No monthly bill.

We get paid when you get paid.

Create your free account

You might also like

Browse all articles →

New answers, by email

Stay up to date

New answers for service pros, by email.

Submitting subscribes you to emails from Service Penguin. You can unsubscribe any time.